ARCHITECT SPECIFICATION -
RIOPEL MODEL 3300 & 3700 REAR LOADING STAINLESS STEEL MAILBOXES

DIVISION 10 - SPECIALTIES
SECTION 10550 - POSTAL SPECIALTIES
 
1.1 MAIL BOXES
  .1 
PROVIDE CANADA POST APPROVED MODULAR REAR LOADING STAINLESS STEEL MAILBOXES IN MULTIPLE UNITS OF GROUPED COMPARTMENTS, MODELS 3300 & 3700 AS MANUFACTURED BY P. RIOPEL INC OF MONTREAL, QC., TEL: 514-934-0385 FAX: 934-1732.
E-MAIL: INFO@P-RIOPEL.COM

  .2 
SUPPLY ____ SIZE "B" TWO COMPARTMENT MODULES WITH COMPARTMENT DIMENSIONS 150 MM X 150 MM X 356 MM DEEP. ____SIZE "B" THREE COMPARTMENT MODULES WITH COMPARTMENT DIMENSIONS 150 M M X 150 MM X 356 MM DEEP. ____ SIZE "CH" DOUBLE WIDE COMPARTMENTS, 150 MM HIGH X 302 MM WIDE X 356 MM DEEP. ____ SIZE "CV" DOUBLE HIGH COMPARTMENTS, 302 MM HIGH X 150 MM WIDE X 356 MM DEEP.___ SIZE "D" PARCEL COMPARTMENTS 302 MM X 302 MM X 356 MM DEEP IN CONFIGURATION AS REQUIRED BY DRAWINGS, PERMITTING FLEXIBLE COMBINATIONS OF DIFFERENT MODULES ON SITE TO FORM REQUIRED SIZED GROUPS OF BOXES. MAILBOXES MAY BE SUPPLIED ASSEMBLED BY THE MANUFACTURER.

  .3 
REAR OF MODULE IS OPEN TO ALLOW CANADA POST PERSONNEL TO LOAD MAIL INTO UNIT FROM A MAIL ROOM AND/OR BY REAR PANEL.

1.2 MATERIALS
  .1 
DOORS OF 24 GAUGE 302/304 STAINLESS STEEL WITH 20 GAUGE SATIN COAT GALVANIZED STEEL LINER AND STAINLESS STEEL HINGES.

  .2 
MAILBOX CABINET OF 24 GAUGE SATIN COAT GALVANIZED STEEL WITH SPOT WELDED ASSEMBLY.

1.3 FINISH
  .1 
DOORS WITH NUMBER 4 POLISHED STAINLESS STEEL FACE WITH SATIN FINISH.

  .2 STEEL CABINET SATIN COAT GALVANIZED STEEL.
1.4 LOCKS
  .1 
FIVE PIN TUMBLER CAM LOCK FOR EACH COMPARTMENT DOOR, ALL KEYED DIFFERENT, NICKEL FINISH.

  .2 
TWO KEYS PER LOCK.

1.5 NUMBER PLATES
  .1 
GRAVOPLY 1.6 MM PLASTIC TAB, 18 MM X 37 MM WITH ENGRAVED BLACK NUMBERS ON SILVER GREY WITH ADHESIVE BACKING, TO FIT EMBOSS ON DOOR, NUMBERED IN ACCORDANCE WITH SUITE NUMBERING SYSTEM AND CANADA POST STANDARDS. MAILBOXES MAY BE SUPPLIED WITH WINDOWS WITH CLEAR 3.22 MM PLEXIGLASS.

1.6 INTEGRATED TRIM
.1 
STAINLESS STEEL 16 GAUGE 302/304 CONTINUOUS AROUND FACE PERIMETER OF EACH GROUP ASSEMBLY WITH NUMBER 4 POLISH TO MATCH DOORS .

.2 
ENDS CUT AT 45 DEGREES AND SUPPLIED IN LENGTHS TO SUIT INSTALLATION AS DETAILED ON DRAWINGS.

1.7 LABEL HOLDER
  .1 
ALUMINUM EXTRUDED 12.7 MM WIDE LABEL HOLDER WITH ADHESIVE BACKING TO FASTEN TO REAR OF SHELF WITH CARD LABEL TO SHOW OCCUPANTS NAME.

1.8 INSTALLATION
  .1 
INSTALL MAILBOXES IN ACCORDANCE WITH RIOPEL`S DETAILED SHOP DRAWING AND WRITTEN INSTALLATION INSTRUCTIONS COMPLETE WITH ALL TRIM AS REQUIRED.