ARCHITECT SPECIFICATION
RIOPEL MODEL 7000 FRONT LOADING SEMI-RECESSED MAILBOXES.
RIOPEL MODEL 7200 FRONT LOADING FULLY RECESSED MAILBOXES
DIVISION 10 - SPECIALTIES
SECTION 10550 - POSTAL SPECIALTIES
PAGE 1 OF 2
PART 1 - General
1.1 General
A.
Front Loading mail boxes as supplied by P. Riopel Inc in accordance with
B.
Front loading units shall be designed to accommodate the main door “Crown Lock” provided by Canada Post Corp.
C.
Semi-recessed units have 4" deep steel collar. Cabinet in wall is 10-1/2" deep. Semi-recessed units have all boxes usable. Recessed units have one compartment for Post Office control lock.
1.2 Shop Drawings
A.
Submit shop drawings in accordance with applicable sections.
B.
Indicate sizes and description of components, locations, materials, thicknesses, finish, color, and any other details required to completely describe the product.
PART 2 - Products
2.1 Materials
.A.
Doors: Stamped from 1/4”(6.35mm) thick 6061 T6 aluminum alloy in the required dimensions to form front closures
B.
Frames: Stamped from 3/16”(4.75) thick 6061 T6 aluminum alloy
C.
Bins (Boxes): All welded steel 22 ga (.030“/.76mm thick) cold rolled (interior), wiped satin coat steel (exterior)
D. Hinges: full door length plated steel (interior) stainless steel (exterior) continuous 180 degree hinge, .030”(.75mm) thick, 1/4”(6.35 mm) long knuckle, .090”(2.25 mm) diameter pin.
E. Locks: 5 pin cylinder cam style with 3 keys. Each set has a different combination
F. All Steel Parts of mailboxes are phosphate treated and finished with a baked enamel coating. Aluminum doors and frames are line polished horizontally with a #80 fine grain finish and
G. Number plates: opaque plastic.
H. Fastening Devices: supply units complete with non-ferrous nuts and bolts as required for installation and assembly.
2.2 Fabrication
A.
Each box is supplied with the following accessories:
- door - locking mechanism - frame
- hinge - number plate - fasteners
B.
The lock boxes shall be interchangeable from one position to another in any one assembly. For Front Loading details refer to individual models in catalogue.
C.
Fabricate units so that they are self stacking, easily assembled, secured to the parent structure and bolted together.
2.2 Fabrication
D.
Holes are provided on the sides, together with nuts and bolts, so that each box section can be bolted together securely.
E.
Doors are designed to receive a number plate of transparent material, engraved with the required numerals. The plate is secured by two self tapping screws inside the door.
F.
Doors are securely fastened to frames with a continuous hinge.
G.
Label holders are 11“(280mm) long by 1/2”(12.7 mm) wide, flanged inward in a C’ channel shape, top and bottom providing for a 3/8“(9.5 mm) opening. Holders are securely spot welded to the top rear of each box section.
H.
Types ‘C’, ‘D’, ‘D3’ and ‘E’ boxes, in addition to the above, have two(2) bracket hinges, one on each side(’D3’ has only one on right side), to allow door to be opened to no more than a 90 degree angle.
I.
Boxes should be packed in corrugated cardboard cartons, with foam corners for added protection, no higher than the equivalent height of 10 ‘A’ box high unit.
J. Openings to receive the boxes must be multiples of the following dimensions:
Types A, B, C:
Multiples of 5-1/2”(140 mm) high and 12”(305 mm) wide
Type D:
Multiples of 11”(280 mm) high and 12”(305 mm) wide
Type D3: (each unit is 3 doors high)
Multiples of 11”(280 mm) high and 12”(305 mm) wide
Type E:
Multiples of 11”(280 mm) high and 24” (610 mm) wide
Type F:
Multiple of 16-1/2”(420 mm) high and 12”(305 mm) wide
*Add 3/4” to overall dimensions for rough opening size for ease of installation.
The perimeter space should be sealed with either a wood or aluminum molding.
PART 3 - Execution
3.1 Installation
A.
Install all items in accordance with manufacturer's instructions and to detail drawings, plumb, level, and secure
Note: Specifications subject to change without notice